Awards season · Gear & Technology

Hasselblad Pulls Plug on X2D Hack as 400MP Mod Surfaces

Community firmware hacks bring film looks and monochrome profiles to Ricoh GR, AF-C and 400MP pixel shift to Hasselblad X2D — until Hasselblad asked one developer to stop. FujiMod adds 23 features to the FUJIFILM X70.

Filed
Story1,137 words
Reading6 minutes
Day of year324 · Awards season
Hasselblad X2D, FUJIFILM X70 and Ricoh GR Community Mods – Film Looks, AF-C, 400MP Pixel Shift and 65:24
Hasselblad X2D, FUJIFILM X70 and Ricoh GR Community Mods – Film Looks, AF-C, 400MP Pixel Shift and 65:24pixel2013 / pixabay

Production notes

  • Hasselblad X2D hack with AF-C and eye recognition went offline on November 16 at Hasselblad's request, per the developer
  • Jimmy6Smiles published a six-frame 400MP pixel-shift extension for the X2D II 100C with in-camera reconstruction
  • FujiMod adds 23 features to the 2016 FUJIFILM X70, including F-Log and 65:24 aspect ratio
  • GR4-MonoUnlock ports the GR IV Monochrome's six B&W profiles to the color GR IV via patched firmware 1.11
  • X2D II 100C costs $7,799 at B&H; GR IV Monochrome costs $2,196.95

Independent developers have given Hasselblad's X2D continuous autofocus, eye recognition and a 400MP pixel-shift mode — and then, on the first-generation camera, the work vanished at Hasselblad's request. That is the sharpest edge of the current wave of stills-camera firmware hacks, which now covers Ricoh's GR line and FUJIFILM's 2016 X70 compact. Everything is unofficial, unsupported and, in the case of the older X2D, no longer publicly available.

This is the photographers' chapter of CineD's ongoing series on camera firmware hacks, which previously covered fpSup on the SIGMA fp, the shutter-angle hack on the Sony a7 IV, Wonder Lantern on the Nikon Z30 and Magic Lantern on Canon DSLRs. The methods overlap with the video hacks: card-loaded scripts on one end, fully patched firmware on the other. Some of these features also work in movie mode.

What does GRKit add without touching firmware?

GRKit is the least invasive Ricoh project. It runs from the SD card, never writes to the firmware, and removing the card returns the camera to stock. Press the ADJ lever while shooting and a sixth menu item, GRK, appears with film looks including Portra 400, Velvia 100 and Tri-X 400 with live preview.

The feature list:

  • Framing options from XPan and 2.35:1 through 16:9, 4:3, 5:4, 7:6 and 1:1, with mask or frame lines
  • A date imprint in three styles and film grain in four strengths
  • Bloom and Halation effects with individual strength settings
  • Import of custom .cube LUTs and Lightroom presets via the project website

Framing can crop the JPEG or merely mark the composition; RAW files keep the native 3:2 frame. GRKit loads in 8 to 10 seconds after power-on. An optional fast-start firmware, built on the GRKit website from Ricoh's official file, shortens this — but it does modify the firmware and leaves the SD script setting permanently on. The developer warns the camera can hang at startup if GRKit fails, and the recovery guide is required reading. Testing covers GR III firmware 2.10 and 2.20, GR IIIx 1.60 and 1.70, GR IV 1.11 and 1.20, and GR IV Monochrome 1.00, which gets no film looks; support for the newest firmware versions (2.21, 1.71, 1.21, 1.10/1.11) is untested on camera.

What do the firmware patches change?

GR4-MonoUnlock ports the GR IV Monochrome's six black-and-white profiles — Standard, Solid, Soft, High Contrast, Grainy and an experimental HDR Tone — to the standard color GR IV, in Image Control and in-camera RAW development. Three of them also work in movie mode. The tool verifies Ricoh's official firmware 1.11, writes a patched copy, and installs through the normal update menu, which displays an update from 1.11 to 1.11. Rolling back means installing the official file the same way.

GR Mod is a desktop app covering the GR IV, GR IV Monochrome, GR III and GR IIIx families across their current firmware versions. It goes deeper: up to eight aspect ratios (65:24 yields 6192 x 2272 JPEGs), soft focus on the ADJ lever, up to twenty added Image Control slots from imported .cube or .xmp presets, halation, the monochrome looks on color bodies, and a Direct Flash mode that calculates exposure from guide number and focus distance. Its documentation reads down to memory addresses, and it records an honest failure: an earlier version froze cameras by placing soft focus in a slot the official firmware reads past. A settings guard now resets unknown values to factory defaults.

Why did the Hasselblad toolkit go offline?

The Hasselblad X-System firmware research project documented its findings with validation limits per camera, and the related X2D/907 One-Click Extension Toolkit packaged them for the X2D 100C and the 907X/CFV 100C on stock firmware 4.2.0. Features included AF-C, AF-T face tracking, a separate eye recognition switch, three focus speed levels, automatic screen brightness, and — X2D 100C only — a pixel-shift drive mode for 4, 6 or 16 RAW frames merged on a computer.

The project was careful with claims. Reaching the stock continuous-focus state, it said, "does not establish focusing performance"; one parameter change reduced hunting but caused false focus and was retired. Users were told to run the one-click restore before updating and to keep backups. On November 6 the repositories emptied; by November 16 a note explained that, per the developer, public release stopped at Hasselblad's request. Anyone who installed the toolkit should keep their restore files — there is no public source for them now.

For the X2D II 100C, developer Jimmy6Smiles has published the source of a six-frame 400MP pixel-shift extension with in-camera reconstruction, RAW/JPEG output, zoomed playback and post-reboot recovery. It targets firmware 1.3.16.2, with an adaptation for 1.3.18.1 and a successful capture reported. The developer advises against using it for irreplaceable work: experimental extensions "can cause failed captures, unresponsiveness or data loss".

What does FujiMod bring to the X70?

FujiMod, by developer Jake, adds 23 features to the X70, the discontinued 2016 APS-C compact with a fixed 18.5mm f/2.8 lens. Highlights include highlight-weighted metering and snap focus borrowed from the Ricoh GR III, aspect ratios up to 65:24 and 17:6, ULTRAFINE JPEG, adjustable noise reduction, golden-ratio framing guides, and approximations of ETERNA, Classic Neg., Nostalgic Neg. and REALA ACE. Video gets F-Log, HDMI output of the shooting view and anamorphic de-squeeze from 1.25x to 2.0x. It runs dual-boot from an SD card or installs as a firmware update, built in-browser from the official file, with a browser emulator for trying it first. Not every feature is camera-tested yet; cameras sharing the EXR Processor II, such as the X-T10, X-E2S and X100S, are work in progress. On November 18 the site went "under construction" ahead of a release promising halation, named film recipes, a digital teleconverter and remappable dials. Danish photographer Jonas Rask called the modded X70 "a completely new camera" on Instagram.

The appeal is obvious: in each case the hardware already exists and the missing feature is a software decision — Monochrome profiles on a color GR IV, AF-C on an X2D. All projects are free; GRKit, GR Mod and GR4-MonoUnlock publish source, FujiMod not yet. Modified firmware may void warranty, and an interrupted update can send a camera to manufacturer service. At B&H, the GR IV costs $1,596.99, the GR IV HDF $1,696.99, the GR IV Monochrome $2,196.95 and the X2D II 100C $7,799.

via github.com (Original)

More from Elena Vasquez

Elena Vasquez

Show full bio

Correspondent covering regulation, policy and their impact on Filmmaking News is the working trade daily for at Filmmaking News.

44 articles

Further readings

Next entry »