Awards season · Gear & Technology
SmallRig Sells an iPhone Duo Camera Monitor Rig for $19.99
SmallRig's $19.99 MagSafe cold shoe mount (5156) turns the iPhone Duo's 7.6in OLED into a camera-top monitor — held by a magnet alone, with SmallRig warning against impact movement.
Production notes
- SmallRig's Support with Cold Shoe Mount (5156) costs $19.99 at B&H and SmallRig's store.
- The iPhone Duo's inner display is a 7.6in OLED at 1878 x 2670 pixels, up to 3,000 nits peak.
- The mount weighs 80g, offers seven 1/4"-20 holes, dual rotating shafts and a MagSafe plate.
- SmallRig warns the magnetic attachment must not be used during vigorous or high-impact movement.
- The iPhone Duo starts at $1,999 / €2,299 and records HEVC/H.264 only, without ProRes or Log 2.
For $19.99, SmallRig will bolt Apple's foldable iPhone Duo to your camera's cold shoe and turn its 7.6in inner screen into an on-camera monitor. The catch is in the last word of that sentence: the phone hangs on a magnet, nothing else, and SmallRig itself says don't move vigorously while it's up there.
The accessory isn't new. SmallRig's Support with Cold Shoe Mount (item 5156) has sat in the catalog for a while as a MagSafe phone holder for camera-top monitoring. What's new is the job: the company posted a clip on its Instagram channel showing an unfolded iPhone Duo stuck magnetically to the arm above a cine lens, its inner display serving as the monitor. Take this as a spec-and-concept read, not a hands-on — the unit hasn't crossed a test bench yet.
Why the Duo's screen makes sense
Apple's specs put the inner panel at 7.6in OLED, 1878 x 2670 pixels, 430ppi, ProMotion up to 120Hz, P3 wide color, 1,000 nits typical and 3,000 nits peak brightness outdoors, with a nano-texture matte finish. The panel runs close to square at roughly 1.4:1, so a 16:9 image won't fill it. Work the math from Apple's figures and a full-width 16:9 frame lands at about 157mm / 6.2in wide — roughly a 7.1in diagonal at around 2670 x 1500 pixels.
That's the image size of a typical 7in on-camera monitor, at higher pixel density, with leftover space above and below for app controls. The matte finish could also help outdoors, where glossy phone screens lose to the sun — but that's a guess until someone runs it on a bright set.
What the Duo won't give you is a monitor's toolbox: no SDI or HDMI inputs, no LUT handling, no false color, unless your monitoring app supplies them. And remember the Duo is not a pro video phone — it records HEVC and H.264 only, with no ProRes and no Apple Log 2.
How the mount is built
The 5156 is an aluminum arm with a round magnetic MagSafe plate on top and a cold shoe foot below. Details from SmallRig's manual and the B&H listing:
- Dual rotating shafts for multi-angle adjustment, so you can tilt the phone toward the operator.
- MagSafe connection lets you rotate landscape to portrait without tools.
- Seven 1/4"-20 threaded holes total; the magnetic plate carries two cold shoe mounts plus three of those holes with locating pins.
- A 1/4"-20 thread under the cold shoe foot, so the support can go on a tripod or stabilizer instead.
- SmallRig names its power bank holder (item 2336) as an accessory — sensible for a phone running a monitoring app at high brightness.
The unit measures 127.4 x 27.6 x 59.0mm and weighs 80g, built from aluminum alloy, silicone and stainless steel, with a silicone ring around the magnetic plate. An Allen wrench ships in the box.
What does the magnet change?
Here's the practical question, and SmallRig answers it honestly: the manual warns the magnetic attachment should not be used during vigorous or high-impact movement. The Duo weighs 254g and measures 164.6mm wide when unfolded — a lot of phone on one magnetic contact point, with a tall lever arm above the camera.
On a tripod, a slider, or calm handheld work, probably fine. On a gimbal chase, a car mount, or run-and-gun documentary, trusting a $1,999 / €2,299 phone to a magnet alone is a gamble. A clamp or locking-plate version for the Duo would let a lot of operators sleep better.
One more thing the $19.99 doesn't buy: image transport. The mount only holds the phone. Getting the camera's picture onto the Duo is a separate job, typically a wireless video transmitter with its companion app, or the camera maker's own remote app.
Price and availability
The Support with Cold Shoe Mount (5156) is available now for $19.99 at B&H and for the same price in SmallRig's own store. CVP does not list it at the time of writing.
The concept is genuinely interesting and the price is pocket change. But until someone stress-tests that MagSafe grip in real handheld conditions, treat this as a tripod-bound monitor solution with a $2,000 phone riding on it.
via instagram.com (Original)
More from Amara Osei
Show full bio
Senior reporter covering companies, deals and strategy in Filmmaking News is the working trade daily for at Filmmaking News.
39 articles
Further readings
- Technical Farm Shows Two LCD Viewfinders for Sony FX6 at Inter BEE 2026November 20, 2026
- DNEG to Convert Studio Features to Stereo 3D for Meta VR GlassesNovember 20, 2026
- Hasselblad Pulls Plug on X2D Hack as 400MP Mod SurfacesNovember 20, 2026
- 'Primetime' Assigns Four Camera Formats to Fact, Fiction and DelusionNovember 20, 2026
- Panasonic sets $4,699.99 LUMIX SHX1 price for December 2026November 20, 2026